LED floodlight(IP65) - List of Manufacturers, Suppliers, Companies and Products | IPROS

"IP65・Nihon A LED used" LED floodlight [FL-9 Series]

"IP65・Nichia LED" LED floodlight suitable for a wide range of applications such as sports facilities and grounds.

This is a waterproof high-output LED floodlight that can be used for a wide range of applications, such as large sports facilities and outdoor grounds. It ensures safety with lightning surge performance of 10KV, significantly exceeding the IEC (International Electrotechnical Commission) standard of 4KV. It achieves brightness equivalent to a traditional 1000W mercury lamp with only 200W, reducing power consumption by 80%.

LED Lighting LED Floodlight Series Eco-Big

Eco-friendly lighting for the Earth! This LED lighting significantly reduces electricity costs and CO2 emissions.

Ecobic is an eco-friendly ECO lighting solution that is highly efficient, energy-saving, and mercury-free. It significantly reduces electricity costs and CO2 emissions compared to mercury lamps and incandescent bulbs. The LED lighting has low insect attraction due to the absence of ultraviolet rays. It provides uniform light distribution with astonishing brightness, illuminating a wide area without any unevenness. It can be widely used for lighting up stores, advertising signs, factories, and temporary sites. 【Features】 - High efficiency, energy-saving, and mercury-free - Eco-friendly ECO lighting - Low insect attraction with no ultraviolet rays - Uniform light distribution characteristics - Illuminates a wide area evenly For more details, please contact us or download the catalog.

Large LED Floodlight for Ground Sports Facilities [PO-3 Series]

IP65, salt-resistant, Nichia LED large outdoor floodlight ideal for facilities such as grounds.

This is a waterproof large LED floodlight that can be used in large sports facilities and outdoor grounds. It ensures safety with lightning surge performance of 10KV, significantly exceeding the IEC (International Electrotechnical Commission) standard of 4KV. It achieves brightness equivalent to a traditional 1000W mercury lamp with only 200W, reducing power consumption by 80%. With an IP65 waterproof rating and a salt-resistant coating on the body, its durability for outdoor use has been enhanced.

LED floodlight for illuminated areas【FL-11 series】

IP65, equipped with Nichia LEDs, is an ideal LED floodlight for large signboards, lighting up areas, and area illumination.

●Adoption of highly reliable Nichia LEDs ●Dustproof and waterproof with IP65 rating for safe outdoor use ●Lightning surge performance of 10KV, significantly exceeding international standards ●Four types ranging from 60W to 200W Safety is ensured with lightning surge performance of 10KV, greatly exceeding the IEC (International Electrotechnical Commission) standard of 4KV. Achieves brightness equivalent to a traditional 1000W mercury lamp at just 200W, reducing power consumption by 80%.

Suspended type integrated power supply LED floodlight

Achieves high-power illumination equivalent to a 400W mercury lamp! With an IP65 waterproof rating, it can be used in salt-damaged areas both indoors and outdoors!

Massively arranged Philips LED chips achieve high-power illumination. With excellent corrosion resistance, they adapt to external environments, making them recommended for lighting in high-ceiling factories, gymnasiums, and sports facilities. They have excellent heat dissipation, and automatically turn off when the maximum temperature of the power supply reaches 95°C. (※ The product has a built-in temperature protection circuit in the power supply.) 【Features】 ■ IP65 waterproof and dustproof, safe to use even in bad weather. (※ Using in heavy rain from typhoons may risk internal water ingress.) ■ Standard specification for 6kV lightning surge, meeting the voltage standards set by the IEC (International Electrotechnical Commission). ■ Confidence with a 5-year warranty, and PSE certification obtained.

LED Floodlight LP-S series

This is a highly praised IP65 floodlight with light for signage. Integrated power supply!

Medium-sized signboard and LED floodlight for lighting up【FL-6 Series】

Medium-sized signboard with IP65 and Nichia LED, ideal for small LED floodlights for lighting up.

The vertical light distribution ensures a wide range of brightness with fewer units. It achieves brightness equivalent to a conventional 400W mercury lamp with just 100W, reducing power consumption by 75%.

Small Signboard and Parapet LED Floodlight [FL-8 Series]

"IP65・Nichia LED" Compact LED Floodlight Ideal for Small Sign Lighting

The lightweight design reduces the burden on the installation area. The wide beam spreads horizontally, illuminating a broad area. It achieves brightness equivalent to a conventional 400W mercury lamp with just 100W, reducing power consumption by 75%.

Cylindrical LED Rechargeable Spotlight

360-degree emission angle! 100% emission with 8 hours of long-lasting support.

The "Cylindrical LED Rechargeable Spotlight" is an LED spotlight that demonstrates its power at night work sites. Being rechargeable, it does not require a generator or outlet, and can be charged at home. Its lightweight design allows for easy transport to the desired work location. Additionally, it significantly saves energy due to its power-saving features, and its IP65 dustproof and waterproof durability makes it suitable for outdoor use. 【Features】 ■ Cordless rechargeable ■ 3-stage ultra-bright (with protective net) / 2-stage ultra-bright ■ 360-degree light angle ■ IP65 dustproof and waterproof *For more details, please download the PDF or feel free to contact us.

LED mobile light

Achieves 3-stage output, compact size, and lightweight! Equipped with a battery level monitor that digitally displays the charging status.

We offer the "LED Mobile Light." It has three brightness settings: 7W, 12W, and 20W. It is equipped with a battery level monitor that displays the charging status digitally. It has an IP65 dustproof and waterproof rating. Weighing only 1.68 kg, it is lightweight and easy to carry. It can be widely used for nighttime road work, electrical work, construction site tasks in dark areas, as well as for emergency lighting during camping or disasters. 【Features】 ■ Three brightness settings ■ Battery level monitor included ■ Lightweight at 1.68 kg ■ Efficient battery life ■ Dustproof and waterproof (IP65) *For more details, please refer to the PDF document or feel free to contact us.

LED rechargeable floodlight

Great for various scenes such as outdoor work, camping, fishing, and emergency lighting.

The "LED Rechargeable Floodlight" is a high-brightness floodlight equipped with a new type of LED that achieves intense brightness. Since it is rechargeable, there is no need for a generator or outlet; it can be charged at home or in the car. Its lightweight design makes it easy to carry to the desired work location. With energy-saving LEDs for significant power savings, a wide beam angle of 120°, and an IP65 dustproof and waterproof durable specification, it can be used outdoors. It is convenient for various applications. 【Features】 ■ Lithium-ion battery ■ IP65 dustproof and waterproof ■ High-power LED *For more details, please refer to the PDF document or feel free to contact us.

"Long Life" LED Lighting for Streetlights and Parking Lot Security Lights [ST-7 Series]

LED floodlight using IP65 and Nichia LEDs, ideal for parking lot lights and security lights.

The compact and lightweight design balances workability and safety. With a long lifespan (60,000 hours), it significantly reduces the cost and effort of maintenance, such as lamp replacement at heights. It achieves brightness equivalent to a conventional 250W mercury lamp with only 60W, reducing power consumption by approximately 76%.

"Long Life" LED Lighting for Streetlights and Parking Lot Lights [ST-10 Series]

LED floodlight using IP65 and Nichia LEDs, ideal for parking lot lights and security lights.

The long lifespan (60,000 hours) significantly reduces the cost and effort of maintenance, such as lamp replacement at high altitudes. It uses Nichia-made LEDs for quality assurance. It achieves brightness equivalent to a conventional 1000W mercury lamp with just 180W, reducing power consumption by approximately 82%.

Safety measures light for forklifts [KWT18C-N-12B]

This is an ideal blue LED floodlight for forklift safety measures. It projects a blue circle onto the floor with a spot beam to alert the surroundings of potential hazards.

The KWT18C-N-12B is a blue LED spotlight developed as a safety measure light for forklifts. By illuminating the floor in the direction of the lift's movement and projecting onto the rear floor, which is difficult for the driver to see, it can alert those nearby to potential dangers and help prevent accidents. It is compatible with a voltage range of DC 12 to 65V, making it suitable for various vehicles. 【Features】 ● Safety measure light for forklifts ● IP68 completely waterproof design ● Wide range driver supports DC 11V to 65V ● Thick aluminum die-cast body ● Sturdy and compact design with limitless applications

LED Indoor and Outdoor Portable Stand Lighting "Omni LED Light"

Rust-resistant stainless steel guard and complete waterproof and dustproof IP65 for outdoor use!

This product is an LED light that provides 360° omnidirectional illumination. It is compatible with commercially available portable power supplies (100V output). It is foldable and comes with an integrated tripod. Please use it in dark areas such as parks and school club activities at night, campsites, emergency evacuation locations during disasters, and dimly lit parking lots. 【Features】 ■ 360° omnidirectional illumination ■ Waterproof and dustproof IP65 ■ Suitable for outdoor use ■ With guard ■ Portable *For more details, please refer to the PDF document or feel free to contact us.

"Optimal for Gas Stations" LED Canopy Lighting [CP3 Series]

LED floodlight developed for canopy roofs at gas stations, etc., with IP65 and Nichia LED.

The CP series has been renewed! While the appearance has become smarter, brightness is firmly secured, and the body is now made of rust-resistant aluminum. We offer four types of brightness: 80W, 120W, 150W, and 200W. Achieve brightness equivalent to a conventional 400W mercury lamp with just 120W, reducing power consumption by 70%. How about renewing the lighting for gas stations or large facility canopies?

LED floodlight (equivalent to 300W mercury lamp)

Achieves brightness equivalent to a 300W mercury lamp with a luminous flux of 11,500 lm.

- LED floodlight equivalent to a 300-watt mercury lamp with a luminous flux of 11,500 lm. - Two types of beam angles: 80° (medium angle) and 110° (wide angle). - The light-emitting surface is available in a clear type that emphasizes direct illumination and a frosted type that reduces glare. - Waterproof and dustproof performance rated at IP65, suitable for outdoor use. - The mounting arm can be adjusted for angle, allowing for illumination of any desired location. 【About Eco Trust Japan】 A domestic manufacturer with a proven track record and trusted "reliable quality," with 2.5 million straight LED lamps adopted in Japan.

Heavy machinery and vehicle-mounted LED floodlight [KWT18 Series] compatible with 48V.

Ideal compact and lightweight design for shield beam alternative lighting, compatible with 48V battery forklifts.

The KWT18 series is a compact and lightweight (100mm square) LED floodlight. It can serve as an alternative to the widely used shield beam. With the adoption of a wide-range driver, it can accommodate a broad voltage range of DC 11V to 65V, making it suitable for use in 12V, 24V, and 48V vehicles. Its robust design with a thick aluminum die-cast body is resistant to vibrations, and its complete waterproofing makes it ideal for permanent outdoor use in vehicles. It is designed with outdoor use in mind and boasts excellent durability. 【Features】 ● Equipped with the latest LED "CREE XT-E" chip ● High color rendering index (CRI), faithfully reproducing the colors of illuminated objects ● IP68 complete waterproof design ● Wide-range driver supports DC 11V to 65V ● Thick aluminum die-cast body ● Sturdy and compact design with limitless applications

Japan-Asia LED IP65 LED Floodlight [FL-4 Series]

LED lighting that can be installed on flat surfaces, vertical surfaces, and ceilings, ideal for factories and warehouses where existing frameworks can be directly utilized for renewal and used as floodlights.

Achieving brightness equivalent to a conventional 400W mercury lamp with just 100W, reducing power consumption by approximately 75%. Efficient heat dissipation ensures a long lifespan, significantly lowering maintenance costs associated with replacement and repairs. ■ Abundant Covers A wide range of covers is available, with irradiation angles from 60° to 120°. You can choose between a transparent type that emphasizes brightness and a milky type that reduces glare, depending on the application. ■ Excellent Heat Dissipation The heat sink of the HB series uses aluminum AA1070, which is superior to commonly used heat dissipation materials. For the 200W/240W models, a magnesium alloy with even higher heat dissipation properties is employed. This efficiently dissipates the heat from the LEDs, maintaining brightness while ensuring a long lifespan, achieving both improved heat dissipation efficiency and a compact, lightweight body. ■ Uses Nichia LEDs Utilizing reliable Nichia LEDs, it achieves high efficiency with quality light and long lifespan. ■ Condensation Prevention Vent The condensation prevention vent attached to the light-emitting surface blocks the entry of water and dust from the outside, allowing only air to pass through. This maintains ventilation and prevents condensation and heat buildup inside the fixture. ■ Standard Equipped with Fall Prevention Wire To enhance safety, a fall prevention wire is standard equipment.

Heavy machinery and vehicle-mounted LED floodlight [KWM50 Series] compatible with 48V.

Equipped with high-performance 10W "CREE XM-L2" LED, sturdy and compact design, compatible with 48V battery forklifts.

The KWM50 series is an ultra-compact and lightweight LED floodlight equipped with a new 10W high-power chip "CREE-XM-L2." It features a wide-range driver that supports direct current from 9V to 65V. It is compatible not only with 12V and 24V vehicles but also with vehicles powered by 48V, such as battery forklifts. Its vibration-resistant design ensures safe installation on construction machinery that experiences a lot of vibration. With an IP68 completely waterproof design, it boasts sufficient durability for use on cruisers and outdoors. 【Features】 ● Equipped with a high-performance 10W LED "CREE XM-L2" chip ● Vibration-resistant design ensures safe installation on construction machinery that experiences a lot of vibration ● Completely waterproof design equivalent to IP68 ● Robust aluminum die-cast body and iron bracket ● Safe design with thermal management function and aluminum fin body *For more details, please contact us.

Heavy machinery and vehicle-mounted LED floodlight [KWM70 Series] compatible with 48V.

Equipped with a high-performance 10W new type LED "CREE XM-L2", sturdy and compact design.

The KWM70 series is an ultra-compact and lightweight LED floodlight equipped with a new 10W high-power chip "CREE-XM-L2". It features a wide-range driver that supports direct current from 12V to 65V. It is compatible not only with 12V and 24V vehicles but also with vehicles powered by 48V sources, such as battery forklifts. Designed for vibration resistance, it can be safely mounted on construction machinery that experiences a lot of vibration. With an IP68 completely waterproof design, it boasts sufficient durability for use on cruisers and outdoors. 【Features】 ● Equipped with a high-performance 10W LED "CREE XM-L2" chip ● Designed for vibration resistance, making it safe for mounting on construction machinery that experiences a lot of vibration ● Completely waterproof design equivalent to IP68 ● Utilizes a sturdy aluminum die-cast body and iron bracket ● Safe design with thermal management features and aluminum fin body

Heavy machinery and vehicle-mounted LED floodlight [KWL20 Series] compatible with 48V.

Equipped with a high-performance 3.9W "CREE XP-E2" LED, designed to be compact and lightweight, compatible with 48V battery forklifts.

The KWL20 series is an ideal LED floodlight device for replacing shield beams. It offers five types of beam angles: ultra-wide 110 degrees, wide 65 degrees, medium-wide 41 degrees, medium 23 degrees, and narrow 15 degrees. Its shock-resistant design makes it safe for installation on heavy machinery that experiences a lot of vibration. It operates on a DC power supply ranging from 12V to 65V, making it widely usable for 12V, 24V, and 48V vehicles. It features a fully waterproof design equivalent to IP68. It has been widely mounted on railway maintenance vehicles and has been used for long periods in multiple tampers (multi-tam), track motor cars, and rail grinding vehicles. This has demonstrated its vibration resistance, waterproof performance, and high durability. 【Features】 ● Equipped with high-performance lighting LED "CREE XP-E2" ● Compact and lightweight design equivalent to shield beam size, with limitless applications ● Ideal for replacing discontinued shield beams in ships and forklifts ● Dimming is possible by connecting an optional digital dimming unit ● By attaching the handle kit [HDLK1], it can also be used as a handy light ● Safe design with thermal management function and aluminum fin body *For more details, please contact us.

LED Floodlight 'RO-20W'

Waterproof and dustproof standard IP65 compliant! Rechargeable LED work light with adjustable brightness in three levels.

The "RO-20W" is a rechargeable LED work light that can be hung for use. The brightness can be adjusted in three levels: 100%, 50%, and 15% by operating the switch. The handle can be moved up and down to adjust the angle, and it complies with the waterproof and dustproof standard IP65. 【Features】 ■ Can be hung for use ■ Angle can be adjusted by moving the handle up and down ■ Brightness can be adjusted in three levels (100%, 50%, 15%) by operating the switch ■ Comes with an "AC110/220V charging adapter" and a "DC24V car-specific cigarette socket charger" *For more details, please refer to the PDF document or feel free to contact us.

LED floodlight for fire trucks [KWM70-F series] compatible with 48V.

Perfect for on-site lighting for fire trucks and rescue vehicles!

The KWM70-F series is an ultra-compact and lightweight LED floodlight equipped with a new high-power 10W chip, "CREE-XM-L2." It features a wide-range driver that supports direct current from 12V to 65V. It is compatible not only with 12V and 24V vehicles but also with vehicles powered by 48V. Designed for vibration resistance, it can be safely mounted on construction machinery that experiences a lot of vibration. With an IP68 fully waterproof design, it boasts sufficient durability for use on cruisers and outdoors. 【Features】 ● Brightly illuminates nighttime work sites ● Equipped with a high-performance 10W LED "CREE XM-L2" chip ● Designed for vibration resistance, making it safe for mounting on construction machinery ● Fully waterproof design equivalent to IP68 ● Utilizes a robust aluminum die-cast body and iron bracket ● Safe design with thermal management features and aluminum fin body

Japan-made HLD6820S-3 Floodlight LED Mercury Lamp Replacement IP65

15000lm angle adjustable waterproof LED lighting, surge protection 15kV, suitable for pools, resistant to salt damage, adaptable for special environments, energy-saving, illuminance calculation, free demo unit rental.

■Factory, warehouse, outdoor lighting, pool, oil mist, HACCP, salt damage areas, etc. Special environment compatible high ceiling LED lighting Supports installment and leasing to reduce initial introduction costs! 【HLD6820S-3 Series】 Two types of light distribution to choose from! - Narrow beam type 36° HLD003-A60-SS-ST /120W - Wide beam type 123° HLD003-B60-SS-ST /120W 【Specifications】 - Power consumption: 100V 120W, 200V 118W - Input voltage: Compatible with 100-242V - Luminous flux: 15,000lm - Surge protection: 15kV (common mode) - Protection rating: IP65 - Rated lifespan: 60,000 hours 【Features】 Hamada Press Kogei's mercury lamp replacement LED "Hammer Beam" offers a wide variety of options to suit different spaces and applications! Achieves the optimal lighting environment with its unique angle adjustment feature. *For more details, please download the PDF or feel free to contact us.

Japan-made HLD6820S-2 Floodlight LED Mercury Lamp Replacement IP65

10,000lm angle-adjustable waterproof LED lighting, surge protection 15kV, suitable for pools, resistant to salt damage, compatible with special environments, energy-saving, illuminance calculation, free demo unit rental.

■Factory, warehouse, outdoor lighting, pool, oil mist, HACCP, salt damage areas, etc. Special environment compatible high ceiling LED lighting Also supports installment and leasing to reduce initial introduction costs! 【HLD6820S-2 Series】 Two types of light distribution to choose from! - Narrow angle type 36° HLD6820S-2A60/80W - Wide angle type 123° HLD6820S-2B60/80W 【Specifications】 - Power consumption: 80W - Input voltage: Compatible with 100-242V - Luminous flux: 10,000lm - Surge protection: 15kV (common mode) - Protection rating: IP65 - Rated lifespan: 60,000 hours 【Features】 Hamada Press Kogei's mercury lamp replacement LED "Hammer Beam" offers a wide variety of options to suit different spaces and applications! Achieves the optimal lighting environment with a unique angle adjustment feature. *For more details, please download the PDF or feel free to contact us.

Rechargeable LED floodlight (battery-operated LED floodlight) [BTX10]

Compact, lightweight, and impact-resistant design that illuminates all work sites, even during emergencies such as disasters.

The BTX10 is a compact and lightweight rechargeable LED floodlight. With all electronic components designed on-board, it is resistant to vibrations and shocks, ensuring safety. A microcontroller constantly monitors the battery status to maintain optimal conditions. It is equipped with an indicator that allows you to easily check the remaining battery level during charging and while lit. The charging status and battery level can be confirmed with three colors of blinking: green, orange, and red. Finding the floodlight in the dark can be surprisingly difficult, but this product features a status indicator that blinks every 8 seconds even when not in use, helping to locate it. It has an IP65 equivalent waterproof design, making it safe to use in emergencies even when wet. 【Features】 ● Compact, lightweight, and shock-resistant design that illuminates any work site ● Strong resistance to vibrations and shocks for peace of mind ● High color rendering, faithfully reproducing the colors of illuminated objects ● Convenient three-level dimming function ● Capable of illuminating an entire room in places without power at night ● Continuous lighting time: 100% for 4.5 hours / 50% for 9 hours / 25% for 18 hours ● Approximately 5 hours of charging allows for up to about 18 hours of continuous lighting ● Equipped with a status indicator for checking battery level *For more details, please contact us.

Rechargeable LED floodlight (Battery-operated LED floodlight) [BTX20]

Compact, lightweight, and impact-resistant design that illuminates all work sites, even in emergencies such as disasters.

The BTX20 is a compact and lightweight rechargeable LED floodlight. With all electronic components designed on board, it is resistant to vibrations and impacts, ensuring safety. A microcontroller constantly monitors the battery status to maintain optimal conditions. It features an indicator that allows you to check the battery level at a glance during charging and when lit. The charging status and battery level can be confirmed with three colors of blinking: green, orange, and red. Finding the floodlight in the dark can be surprisingly difficult, but this product blinks the status indicator every 8 seconds even when not in use, helping to locate it. It has an IP65 equivalent waterproof design, making it safe to use in emergencies even when wet. 【Features】 ● Compact, lightweight, and impact-resistant design to illuminate any work site ● Strong resistance to vibrations and impacts for peace of mind ● High color rendering ability, faithfully reproducing the colors of illuminated objects ● Convenient three-level dimming function ● Capable of illuminating an entire room in places without nighttime power ● Continuous lighting time: 100% for 4.5 hours / 50% for 9 hours / 25% for 18 hours ● Approximately 5 hours of charging allows for up to about 18 hours of continuous lighting ● Equipped with a status indicator for checking battery level *For more details, please contact us.

LED Floodlight FL-06-G2

For high-quality LED high bay lights and LED floodlights, please leave it to us.

【Features】 ■ Very bright, low cost, energy-saving ■ IP65 waterproof ■ Easy to install ■ 5-year manufacturer warranty ■ Reliable Mean Well power supply, etc. *For more details, please download the PDF or feel free to contact us.

LED floodlight

The color rendering index is Ra80. A product lineup with total luminous flux ranging from 7,500 to 24,000 lumens.

We offer a variety of "LED floodlights." Available models include the 50W "G-UFOF50," the 100W "G-UFOF100," and the 150W "G-UFOF150." All have a design life of 50,000 hours and a color temperature of 5000K. Additionally, the protection rating is IP65, and the beam angle is 120° transparent. Please feel free to contact us if you have any requests. 【G-UFOF50 Specifications (Partial)】 ■Product Name: 50W LED Floodlight ■Power Consumption: 50W ■Power Supply: SOSEN (China) ■Input Voltage: 100V-277V AC ■Size: 255mm × 195mm *For more details, please download the PDF or feel free to contact us.